Mod «Centralized Climate Control (Continued)» for Rimworld (v1.0 - 1.4)

Centralized Air Cooling/Heating System for RimWorld. Build Large Piped Air Climate Systems away from your buildings.

Peculiarities:

• Single Heating/Cooling System Heating
  and cooling is done by 1 unit, which reduces the need to create coolers and heaters.
• Outside (and far) Heat Dissipation: The heat dissipation of the climate control units is not located near the rooms. They are located far from your rooms, which allows you to make adjacent rooms with refrigerators.
• Air Grid: There is a grid resource (such as electricity) that is generated and consumed, which is further determined by the efficiency of the Grid.

1. Flow Efficiency
   The rate at which your rooms will cool/warm or keep warm due to room temperature changes.
   Cost: 1 Intake fan for 3 rooms
2. Thermal Efficiency. The rate at which your climate control units can heat the air. Sudden changes, such as extreme cold or heat, will cause very cold or very hot air to enter your system. The climate control units take care of this, but their speed is determined by this efficiency unit.

Value: 1 climate control unit for 3 intake fans

You can always test the effectiveness of each network on the vents.

• Air temperature inside pipes
  This mod also deals with the air temperature in the pipe network.
• Can share air without climate control units
• Air intakes take into account the temperature of the air they receive. We can practically create networks without climate control that have the same temperature. For example: Several refrigerators can be connected together, but only 1 receives cooling. The rest are just sharing air.
• Large buildings for the late game: Build larger air intakes and climate units that are about 5 times more powerful than a normal car.
• Pipe switches: If you have multiple pipes near a vent, you can force it to connect to a specific pipe.

• Fix

13.12.22 (1.0-1.4)

DOWNLOAD